Home › Forums › TWAIN Classic › Imprinter/Endorser stuff › Re: Re: controlling Fujitsu imprinter
@spike wrote:
That’s a good idea Thierry – I just dumped the custom DS data from my fi-5110C, and it’s in INI file format. Below is an excerpt, notice the Endorser section. I think you could save this to a file and use the Windows Profile functions to edit it. Shameless plug: This would be especially easy with EZTwain Pro, which has single functions to get and set the CustomDsData…
[CustomHead]
Driver=FJTW32.DS
Version=V9.18
Scanner=fi-5110Cdj
DataLength=04831
StructureRevision=5.6
[Common]
ImageScanner=fi-5110Cdj
ReverseImageForm=0
BackGroundCompensate=0
…
EnableEndorse=0
EndorseSurface=0
EndorseYOffset=0
EndorseDirect=0
InitialCount=0
CounterStep=0
CounterMode=0
EndorseString=On the other hand, I’d understand if you wanted to use standard or semi-standard TWAIN capabilities, since the CustomDsData is technically ‘opaque’ – you can’t count on anything in it staying the same from one version of the driver to the next.
Also you have to know how works the ini format for Fujitsu ..
[Common]
ImageScanner= –< this define the section you should use for the current selected scanner exemple :
[Common]
ImageScanner=Fi-5900Cd
Then on section you can modify :
[Fi-5900Cd]
EnableEndorse=0
EndorseSurface=0
EndorseYOffset=0
EndorseDirect=0
InitialCount=0
CounterStep=0
CounterMode=0
EndorseString=
There is many redundant information on this ini file structure, so take care to modify the good section, the [Common] section could work if you have only one scanner attached I think …
I did many tests to dump many configurations and r-e the value and section modified, I don’t have any official documentation about this ini structure … 😕