- This topic has 1 reply, 2 voices, and was last updated 11 years, 7 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
Forums › TWAIN Classic › How to set width and the length of the page?
Hi,
I have Fujitsu fi-6130 scanner.
In the configuration setting window I may set Long Duplex Scan Type.
When I choose it, another dialog box pops up asking to set
the width and the length of the page.
I may set maximum values 216 mm X about 3125 mm.
I had a problem to set Long duplex scan type through Caps but finally managed to do this, but still I don’t know how to set these two values (length and height to their maximum values).
The worst thing is that this option seems not to exists in the capabilities as I haven’t been able to find it among others.
Please help me, because this is the only one place where I may find the answer, non one would be able to help me, outside of the webpage.
Thanks for help
there have been post here before about that vendor not exposing their capabilities and instead using CustomDsData hacks. If it were me I would start with Dosadi’s ‘twirl’ and check the output of the report, you can post it here if you have trouble with it. Twirl will let you know if the Capabilities are reported are supported and how many general problems there are with the driver.
.